Home Garden

How to Know How Much to Water a New Maple Tree

Maple trees (Acer spp.) provide, shade, color, screening, wind protection and a number of other benefits to the landscape. Many varieties of maples exist, each with slightly different cultural requirements and physical characteristics. In general, maples require full sunlight and fast-draining, nutrient-rich, moist soil. Depending upon the specific variety, maples grow in U.S. Department of Agriculture plant hardiness zones 3 through 9. Soil moisture proves extremely important to newly planted maples, encouraging development of new tissue and minimizing transplant shock. Regulation of the amount of water applied and its timing promote a new maple's successful establishment.

Things You'll Need

  • Tape measure
  • Rain gauge
  • Trowel
  • Garden hose or 5-gallon bucket
Show More

Instructions

    • 1

      Measure the width of the maple tree's trunk, 6 inches above the ground, with a tape measure to discover its circumference. Record the measurement in inches. Divide the measurement by 3.14 to determine the trunk's diameter. Round the result to the nearest inch. For example: If the trunk's circumference measures 5 inches, then divide 5 by 3.14 to get 1.59. Round 1.59 to 2 inches.

    • 2

      Multiply the diameter by 5 and then add 5 to calculate the amount of water needed by the tree. A new maple tree requires a minimum of 5 gallons of water per week plus an additional 5 gallons per inch of trunk diameter. Continuing with the previous example, you would multiply 2 inches by 5 to get 10. Add 10 plus 5 to get 15. The tree in this example needs 15 gallons of water per week.

    • 3

      Install a rain gauge in an open area within a few feet of the maple canopy's outer perimeter. Check the gauge after each rainfall, and record the amount of rain received. Keep a running total each week to determine the amount of rainfall received every seven days. Water the maple when rainfall is less than 1 inch during a seven-day period.

    • 4

      Dig to a depth of 4 to 6 inches in the maple's root ball zone with a trowel after seven days of no rainfall. Keep the digging at least 6 inches away from the trunk to avoid damaging important roots. Dig a second hole just outside of the root ball zone, 4 to 8 inches deep. Grab one handful of the soil displaced from the deepest point of each hole. Squeeze the soil in each hand, feeling its moisture content. Water the maple if the resulting soil balls break apart easily when touched and if the soil samples feel dry or slightly damp to the touch. Do not water the maple if the samples feel soggy, moist, or release water when squeezed. Refill each hole with the displaced soil, tamping it down firmly.

    • 5

      Apply the calculated amount of water at a rate of 1 gallon per minute using a garden hose or a 5-gallon bucket containing 3 holes, 1/8-inch in diameter, in its bottom. Distribute the water as evenly as possible over the entire root zone of the tree.