How to Apply Kocide Fungicide

Kocide, a fungicide manufactured by DuPont, has several uses that benefit vegetation. When properly applied, Kocide can control downy mildew on lettuce and soybeans, bacterial blight on soybeans, citrus canker, and black spot on citrus plants. As a dry fungicide, it must be mixed with water and sprayed over plants to be effective. DuPont provides detailed ratios for each type of crop. However, the actual application process is the same regardless of crop type.

Sprayer
Chemical-resistant gloves
Long-sleeved shirt and pants

Instructions

- 1
  Put on a long-sleeved shirt and full-length pants. Wear chemical-resistant gloves before handling Kocide. According to DuPont, Kocide is highly toxic and should never come into contact with bare skin.
- 2
  Mix Kocide with water according to DuPont's specific instructions. For example, to suppress citrus canker, mix at least 1 lb. Kocide with water to spray 1 acre; do not use more than 2.5 lbs.
- 3
  Check the wind speed before you begin spraying Kocide. DuPont recommends that you do not spray Kocide when wind speeds exceed 15 mph.
- 4
  Spray the affected area with the Kocide mixture in long, sweeping strokes. If you are applying Kocide with a hand sprayer, spray individual plants one at a time. Do not remove your protective clothing or gloves while spraying.
- 5
  Wash the outside of your gloves with hot, soapy water before removing them.

Cross Pollination of an Avocado

Stratification of Hickory Nuts

Outdoor Growing