How to Grow Clematis on a Lamp Post

Select an appropriate clematis for a lamppost. You want to choose one that has a mature height of 10 to 12 feet. Most commonly available clematis fit that specification, however, there are some mammoth ones and some mounding ones that you want to avoid for this location.

Make a sturdy support system for the post by creating a cylinder of wire fencing material to wrap around the lamppost. Cut the wire fencing material using the cutters so the cylinder will be 4 inches wider than the circumference of the lamppost. Paint it to match the lamppost with spray paint. Wrap it around the post and secure the cylinder by wrapping the cut ends around the straight end. The support should not be flush with the lamppost surface. There will be about an inch or two clearance between the post and the wire. The extra distance provides ventilation and room for the clematis to weave through easily. Hang the wire cylinder from cup hooks affixed to the top of the post, for a wood post, or affix wood scraps between a metal post and the wire as a buffer to keep it spaced properly.

Plant the clematis about a foot away from the lamppost, leaving any trellis that came with the plant attached. This distance provides room for growth and room to access the lamppost for painting or other maintenance. Angle the root ball and trellis towards the lamppost and backfill with good quality soil amended with at least 50 percent compost and a handful of super-phosphate for good root development. Add 2 inches of mulch over the planting area to retain moisture and suppress weeds.

Water the clematis throughout the growing season so that the plant receives at least 1 inch of water a week. Clematis do not like drying out.

Cut the clematis completely to the base the spring after planting, regardless of the pruning instructions for the type of clematis. This will create good branching and multiple stems to produce a full plant.

Fertilize with a rose or tomato granular food each spring. Prune according to the type of clematis you have.

Attach the vine stems to the support with vine clips early in the season to guide the first few stems up the support. After that initial assistance, the vine will be able to twine its way to the top on its own. When the vine reaches the top of the lamppost, it starts to cascade gracefully down the structure.