The Stihl MS 360 weighs 12.6 pounds without its bar and chain. It has a 1.32 pint fuel tank and a 0.68 pint lubricating oil tank, and it is compatible with 16-, 18-or 20-inch cutting bars.
This chain saw is powered by a Stihl single-cylinder, two-stroke engine. The engine has a displacement of 3.75 cubic inches and a 1.89-inch bore. It produces a stroke of 1.34 inches and a maximum speed of 2800 RPM.
The Stihl MS 360 has an electronic magneto ignition system that is activated by a 0.14-inch diameter, 37.8-inch long starter rope. Its carburetor is an all-position diaphragm unit with an integral fuel pump. It uses a Bosch WSR 6F, NGK BPMR 7A or Champion RCJ 6Y spark plug, all of which are interchangeable and have a 0.02-inch electrode gap and M 14x1.25 standard, 0.37-inch long thread.
The Stihl MS 360 requires a fuel mix of unleaded gasoline with an octane rating of at least 89 (RON designation) and two-stroke engine oil classified as "TC" with a 50:1 ratio of gasoline to oil. The recommended chain oil for this model is Stihl Bioplus or any chain-and-bar lubricant oil with a non-fling additive. The chain lubrication mechanism of the MS 360 is a fully-automatic, speed-controlled reciprocating oil pump that also allows for manual flow control.
The recommended cutting assemblies for this saw are:
Bar: Stihl reduced kickback bar (green label) for 0.325 in. and 3/8-in. pitch; Rollomatic 16-, 18- or 20-inch with sprocket nose.
Chain: Stihl low kickback chain for 3/8-inch pitch; 0.325-inch Rapid-Micro 2; 3/8-inch Rapid-Micro 2.
Chain sprocket: 8-tooth for 0.325-inch pitch spur sprocket or 7-tooth for 3/8-inch spur sprocket.
Duromatic, Rapid-Duro and Stihl yellow label cutting bars and chains are also compatible with the Stihl MS360 in 3/8-inch or 0.325-inch pitch.