# How to Remove Sand From Gravel With a Leaf Blower
Sand and debris may gradually cover gravel over time. Removing the sand takes a long time if you use a broom. A leaf blower accomplishes the task much easier and faster and, therefore, is more efficient for large areas of gravel. You must give yourself plenty of time for this task, however, to avoid injury from rushing through this job. When airborne, sand or gravel can be dangerous.
Things You'll Need
- Safety goggles
- Work gloves
- Long pants
- Long-sleeved shirt
- Ear plugs
- Dust mask
Instructions
-
-
1
Put on safety goggles, work gloves, long pants, a long-sleeved shirt, ear plugs and a dust mask to protect yourself from airborne debris and the loud sound of the leaf blower. Determine the direction of the wind. You should start with your back toward the wind so that sand and other debris are not blown back at you.
-
2
Point the nozzle away from the gravel when starting the leaf blower. Turn it onto the lowest throttle possible so that you do not blow the gravel away when you start to blow off the sand.
-
3
Turn the nozzle toward the sandy gravel. Keep the end of the nozzle only as close to the gravel as necessary to blow off the sand. Use a back and forth sweeping motion with the nozzle as you proceed. Work slowly and patiently.
-
1
Yard Maintenance
- How to Remove a Drawer From a Desk With Glides
- How to Remove Tires From Snow Blowers
- How to Remove Weeds From Gravel
- How to Remove an Impeller From a Fasco Furnace Blower
- How to Remove Ice From a Driveway With No Chemicals
- How to Clear Snow With a Leaf Blower
- How to Remove Snow From a Gravel Driveway or Pathway
- How to Remove Gold Leaf From Molding
- How to Remove Grease With a Lettuce Leaf
- How to Remove Gravel From Box Culverts
- How to Build a Driveway with Sand, Grass or Gravel
- How to Remove Paint From Steel With Acetone
