How to Set Up a Filter on a 10-Foot Round Inflatable Pool

If you want the fun and convenience of a backyard pool without the expense and hassle of an in-ground pool, an inflatable pool can be a smart choice. These pools are easy to set up, easy to maintain and easy to use. As long as the filtration system is set up properly, the pool water should remain clean and free of algae and other common problems.

Filter cartridge
Pool chemicals
Pool user guide

Instructions

- 1
  Insert the filter hose into the attachment on the side of the pool. Refer to the installation guide that came with your pool for exact instructions, since every pool setup is slightly different.
- 2
  Open the top of the filter and insert the paper filter cartridge. Close the top of the filter.
- 3
  Add the recommended pool chemicals to the water. Refer to the user guide that came with your pool for the recommended mix of chemicals in your newly set up inflatable pool.
- 4
  Plug the filter in and run it for at least eight hours to run the chemicals through the water. Use a pool water test kit to ensure the proper balance of chemicals before using the pool.

How to Install the Aluminum Frame for an Above Ground Pool

How to Remove an Aqua Jet in a Whirlpool

Swimming Pools & Spas