Operating Instructions for the Magna Sweep

Adjusting Speed and Time

• 1

  Turn the pump to the "Off" position.

• 2

  Place the clear lid on the Magna Sweep valve with the groove facing the indentation on the valve body. The groove is above the spray nozzle of the valve.

• 3

  Rotate the lid clockwise for a faster cleaning system or counterclockwise for a slower less powerful cleaning system. Adjust each valve in each zone in the swimming pool to the same area.

• 4

  Turn the pool pump on to view your adjustments. Set a stopwatch and time the valves to determine how long of a cycle they are running. Magna Sweep recommends a cycle of 30 to 60 seconds. Make further adjustments to the speed and timing if necessary.

• 5

  Lift the edge of the band clamp on each valve and pull it straight up and off the valve.

Adjusting Spray Direction

• 6

  Grasp the Quikstop pause control on the top of a valve and pull it straight up in a vertical position. The pause control is the black portion on the top of a valve that is horizontal on top.

• 7

  Push the head of the valve down gently to release its position.

• 8

  Grasp the nozzle and turn it clockwise until it points in the direction desired. Rotate the Quikstop pause control down to its original horizontal position.

• 9

  Repeat these steps to direct the nozzle on each valve within a zone to spray in the same direction.