How to Put Sand Between Pavers

When creating a patio, driveway or walkway out of pavers, it is important to properly execute all steps of the installation process. To sufficiently interlock the individual pavers that make up your patio or path, many professionals suggest filling the spaces between pavers with sand. Done correctly, the sand will keep the pavers in place during the lifespan of your patio or path. Properly installed, a path or patio constructed from pavers can last 20 to 30 years.

Mason's sand
Stiff broom
Hose with spray nozzle

Instructions

- 1
  Spread a thin layer of sand evenly over the tops of the pavers.
- 2
  Sweep the sand into all the spaces between your pavers, starting on one side and working your way toward the other. Use the broom to push the sand between the paving stones, sweeping in all directions until the sand is relatively compacted.
- 3
  Sweep any excess sand off of the surface of your pavers. Use a light touch, in order to avoid disturbing the sand in between the pavers.
- 4
  Turn on your hose and set it to low. Using a spray nozzle, spray the pavers with water to help pack down the sand in between the pavers and wash any remaining sand from the surface. Allow the pavers and sand to dry completely.
- 5
  Start over by pouring more sand over the pavers and repeat the process. This will ensure all areas between the stones are filled with sand.

How to Restain Stamped Concrete

How to Level Ground for Pavers

Paving