How to Seal Travertine Pavers

Travertine is part of the limestone family, and is frequently used in new homes and renovations because of its aesthetic appeal and high quality. With pavers, there are various textures available, including tumbled, honed and polished. While travertine doesn't need to be sealed, it is a beneficial final step if you plan to install tiles in common entertainment areas. Sealing will protect the stone from wear and tear, as well as stains from spilled food or drinks.

Broom
Sealer
Roller
Sponge

Instructions

- 1
  Determine which type of sealant you need based on the style of travertine pavers you chose. Water- and oil-based sealants both offer heavy-duty protection, but depending on where you place stone, you may want a matte finish as opposed to the glossy finish of an oil-based sealant.
- 2
  Sweep the area using a broom. The entire area should be free of dust or debris.
- 3
  Apply a liberal amount of sealant to the pavers using a roller. Make sure all pavers are completely covered with the sealant, and allow it to penetrate the surface for 15 to 30 minutes. Porous stone requires little time, while dense stone may require the full 30 minutes. Wipe off excess sealant, if necessary, using a sponge.
- 4
  Add a second coat if desired. If the stone is porous, you may want to add a second coat to enhance color. Apply the second coat at least an hour after the initial application.
- 5
  Allow the sealant to fully cure for 24 to 72 hours. Light foot traffic is OK six to eight hours after application. To maintain protection and appearance, reapply sealant every one to three years.

Step-by-Step on How to Pave Using Bricks

How to Install Unilock Circle Pavers

Paving