Homemade Boulders

Cover the inside of a mold with petroleum jelly. This will allow the finished form to be easily removed later. Put on protective clothes, a dust mask, gloves and protective eyewear. The materials that you will be using can be caustic to bare skin, dust particles are respiratory irritants, and loose fragments can burn your eyes.

Pour the Portland cement, peat moss and perlite into a large wheelbarrow. Use a shovel to thoroughly mix the ingredients together. If colored stone is desired, add 1 cup of concrete pigment to the dry mix and stir well to distribute the color evenly.

Wet the mixture gradually with a water hose, stopping periodically to stir the water in well. You will know that the correct amount of water has been added when a small handful can be molded in your fist and retain its shape without crumbling when you open your hand. The moistened mixture should be similar to moldable clay.

Spread plastic sheeting in a warm, ventilated space that is free from sudden drafts and wind. Use a trowel to spread the clay-like mixture into the prepared mold, filling it well. Wrap the mold in a plastic bag and secure it closed. This allows the material in the mold to cure very slowly, making a more durable product. Leave the mold in place four or five days.

Put on your protective gear and lightweight rubber gloves. Open the bag and check the mold. If the material in the mold can only be scratched away with difficulty, you may remove the rock boulder from the mold. Otherwise, rewrap the mold and wait three to five more days. Gently unmold the boulder, remembering that it is not yet finished curing and is still easily damaged. Now you may opt to press or pat over the surface with a moist sponge or lightly carve the exterior with sculpting tools to add texture and realistic shape.

Cover the boulder again in the plastic bag and keep it sealed and undisturbed for up to one month in a sunny, warm area. A long, slow drying time will yield a stronger boulder. If you live in a colder climate, this may take twice as long. When the resulting stone sounds hollow, you can remove the bag. Rinse the boulder with a water hose for five minutes once or twice a day for up to seven days to normalize its pH. The new stone will be very alkaline after it cures, and daily rinsing should help correct this. Allow the stone to dry completely. Cement sealant may be added now if you don't wish for your stone to look weathered over time, although some people find that a weathered stone looks more genuine.

Place the new boulder in its new location on your property. It should be relatively light compared to its size. Incorporate it into the landscape by placing plants around it or combining it with other garden features, such as fountains, ponds and walking paths.