Purchase a soil test kit from your county extension agent or, better yet, ask the agent to perform this assessment if it will not be cost prohibitive. The ratios of soil to water to air must be determined as well as salt and phosphorous levels. If these measurements are optimal, drainage piping installation may be delayed, at least for the short term.
Plot the pattern and orientation of your piping according to the soil test results, also keeping the contours of the land in mind. Employ a random design if drainage obstacles are localized. Parallel and herringbone patterns work if the issues are more widespread. Streams or drainage ditches are the desired destinations for the excess water. Figure depth based on water table levels. Drainage tiles are often laid at three to four feet below the surface.
Obtain your piping from a reliable dealer. Cost is variable based on the size and amount of tile needed to complete the job. The size also depends on the slope of the land, which will affect the velocity of drainage. Rent a trailer implement to lay the piping, as it is spooled on large reels.
Feed the predetermined drainage layout coordinates into your GPS. Trench the land with a drainage plow attachment in accordance with this configuration.
Hitch the tubing trailer to your tractor and lay the piping at a creeping speed. This insures proper unraveling at the spool and accurate placement in the trench. Fill the trenches upon completion.