# How Do We Hook a Battery to a John Deere 2750?
The John Deere 2750 is a small utility tractor. The John Deere diesel engine requires a battery for starting. Batteries are included in the purchase of the tractor, but will need to be removed for regular maintenance or replacing. Hooking up a battery to the John Deere 2750 will only take a couple of minutes with a spanner or adjustable wrench. Practice caution when removing the battery as there is a potential for electric shock.
Things You'll Need
- Spanner or adjustable wrench
- Baking soda
- Water
- Cloth
Instructions
-
-
1
Check the terminals and clamps for corrosion. If they are corroded, rinse with a solution of one part baking soda to four parts water. Dry terminals and clamps with a cloth.
-
2
Place the battery in the battery bay. Slide the red positive (+) battery clamp over the positive terminal of the battery. Tighten the screw on the side of the clamp with the spanner or adjustable wrench.
-
3
Place the black negative battery clamp (-) over the negative battery terminal and tighten with the spanner or adjustable wrench. Always remove and replace the negative terminal last.
-
1
Previous:
Overall Landscape Planning
- How to Restore an Old John Deere Lawn Mower
- How to Replace a Mower Deck on a John Deere
- How to Remove a John Deere 318 Flywheel
- How to Hook Up a 37A Snowblower to a 110 John Deere
- How To Repair a John Deere Carb
- How to Replace the Starter in a John Deere 318
- How to Hook Up the Deck on an STX38 John Deere Mower
- How to Identify a John Deere Plow
- How to Find John Deere Lawn Trailers
- How do I Hook Up a Snow Blower Attachment to a John Deere LA 150 Automatic?
- How to Install a John Deere Snow Blade
- The Battery Won't Charge on My John Deere
