How to Hook Drip Systems to PVC Pipe

Drip is the most practical and efficient of the different irrigation systems available. When correctly designed, installed and managed, drip competently maintains the optimal range of moisture in the soil, since it applies water in precise amount on a precise timetable, water is saved and plants are healthier. Hooking drip systems to PVC Pipe is easy and fast, with many different heads to fit every yard just like actual sprinkler systems. Connecting to a PVC pipe can be a cost- and time-saver since the water source can be closer to where you need to irrigate.

Things You'll Need

• Polyvinyl chloride (PVC) male adapter threaded on one side and a slip joint on the other
• Drip system
• PVC glue
• Plumbers tape, also known as Teflon tape

Show More

Instructions

1. • 1

     Dry fit the male adapter to the PVC pipe for good fit. If needed lightly sand the PVC pipe to allow the PVC fitting to fit snug.

   • 2

     Glue the male adapter to the PVC pipe using the PVC glue, work quickly since the glue dries fast. Follow the glue manufacturer for dry times. Ensure that the adapter is facing the direction needed before it dries.

   • 3

     Connect the drip system by screwing it into the male adapter by hand, then with an adjustable wrench to finish tightening.

   • 4

     Turn on the water carefully and pressure test the system, watching for leaks.