Instructions for a 2007 Sunjoy Gazebo

Push the open pipes of the left frame into the pipes on the right frame. The frame pipes are for the top of the gazebo. Most kits have four right frame pieces and four left frame pieces.

Position the screws into the holes on the frames. Tighten the screws.

Place the columns upright on the ground. Position one of the frame pieces on the top of one of the columns. Place the screws into the holes on the frame. Tighten the screws. Attach the other frame pieces on the columns, insert the screws and tighten.

Push the pegs into the holes on the bottom of the columns. Hammer the pegs into the ground.

Place a ladder beside the gazebo. Climb to the top. Push the medium roof bars into the short roof bars. Push the hook in the bottom of the center fixture.

Push the open medium bar ends and the long roof bars into the pipe openings on the center fixture. Alternate the long and medium roof bars.

Push the open long bar ends into the frame arches. Push the open medium bars into the frame corners. Place the screws in the holes on the frame and tighten.

Lay the small canopy over the rooftop. Push the top roof connectors into the center fitting. Place the screws into the holes on the roof connectors and tighten them. Tie the straps on the small canopy around the bars on the roof.

Lay the large canopy over the roof. Tie the straps on the large canopy around the bars on the frame.

Step inside the gazebo. Hang the mosquito net from the top frame with the provided rings.