How to Remove Vulcan Waterproofing Mold

White Vinegar

• 1

  Wipe all traces of the mold off the surface with a rag saturated with white vinegar.

• 2

  Leave the vinegar on the surface for 10 to 15 minutes before rinsing the area with cold water.

• 3

  Dry the surface with a towel.

Oxygen Bleach

• 4

  Mix 1/2 gallon of warm water with 1/2 cup of oxygen bleach.

• 5

  Scrub the mold off the surface with a rag saturated in oxygen bleach mixture.

• 6

  Rinse the surface with cold water after 10 to 15 minutes and towel dry.

Borax

• 7

  Pour 1/2 gallon of warm water in a bucket. Dissolve 1/2 cup of borax in the warm water.

• 8

  Dip a sponge in the borax mixture. Hold the sponge over the bucket and wring it out to remove excess mixture.

• 9

  Scrub the surface with the sponge until you have removed all traces of the mold. Rinse the borax residue off the surface with water and towel dry.