How to Customize a Hair Dryer Holder

A hairdryer holder allows you to store your hairdryer safely when not in use. Most hairdryer holders are made from metal, plastic or wood. If your holder is rather dull to look at and does little to increase the overall appearance of the room, consider customizing it. For the most part, adding a personal touch to your hairdryer holder is a relatively simple process that allows you to incorporate your own tastes and style.

Cloth
Piece of cardboard
Spray paint with build in primer

Instructions

- 1
  Wipe the hairdryer holder with a damp cloth to remove the dirt and dust sitting on the surface. Let the holder air dry or wipe dry with a towel.
- 2
  Place a piece of cardboard outside on a level surface. Lay the hairdryer holder on the cardboard.
- 3
  Shake the spray paint can for several seconds. When choosing the spray paint, use one designed for the specific material from which the holder is made. Additionally, it is recommended to use a spray paint that has a built-in primer.
- 4
  Hold the can of spray paint 10 to 14 inches above the hairdryer holder and press the trigger. Start at the top and apply the paint while moving down the holder. Apply in quick, smooth strokes while keeping the spray can moving. Refrain from spraying too much paint on the holder, as it will cause runs on the surface.
- 5
  Allow the holder to dry for several hours. Turn the holder over and apply the spray paint in the same manner as before. Let the holder dry for several hours.

How to Fix Gauge on a Pressure Cooker

How to Get Stickers Off Sterling Silver

Homemaking