Assemble the Diaper Champ by turning the diaper pail upside down and snapping the base into place. The base is then secured by four screws that must be tightened with a Phillips-head screwdriver.
Turn the Diaper Champ over so that the base is on the floor. Attach the blue (or pink) lid provided in the assembly kit into the top of the Diaper Champ, making sure that it is properly lined up and snaps into place.
Shut the lid of the Diaper Champ to ensure that it snaps securely.
Open the Diaper Champ's lid by pulling out the white flap, which is found below the unit's blue (or pink) handle. Once the white flap is pulled out, the lid is then able to be lifted up.
Install a Diaper Champ bag by first lifting up the blue (or pink) handle 3 inches. This will allow you to insert the bag into the diaper pail.
Insert the dirty diaper into the slot found at the top of the pail. Close the sides of the diaper tightly to ensure that no waste runs out into the pail.
Pull on the handle, found on the top of the lid, to deposit the soiled diaper into the Diaper Champ.
Change the Diaper Champ's bag once the unit it full, approximately every two to three days.