How to Empty a Pledge Fabric Sweeper

The Pledge Fabric Sweeper is a cleaning product made by SC Johnson. Just slide it using short strokes, about 8 to 12 inches in each direction, on your target area. The rollers on the bottom of the enclosed plastic container rotate to trap and lift animal hair. At the time of publication, the average cost for a Pledge Fabric Sweeper was less than $5. However, to help the environment and save money, you can empty and reuse the device.

Flat-head screwdriver
5 inches of fabric hook-and-loop fastener, 1/4-inch wide
Scissors

Instructions

- 1
  Position the flat-head screwdriver between the clear and blue plastic at the base of the Pledge Fabric Sweeper. Slide the screwdriver toward one of the three plastic welds (blue contact points between the clear and blue plastic), until it the plastic weld snaps. Repeat this step until all three points are detached.
- 2
  Empty the Pledge Fabric Sweeper into the trash.
- 3
  Cut the fabric hook-and-loop fastener lengthwise into two 1/8-inch pairs. Apply the loop side to the blue plastic rails of the Pledge Fabric Sweeper. Put the hook side on the clear plastic rails of the sweeper.
- 4
  Place the blue and clear plastic together.

Directions for a Hoover Fold Away Widepath

Assembly Instructions for a Bissell Proheat Pet

Cleaning Appliances