How to Empty WindStorm Vacuum Cleaners

The Palson WindStorm vacuum cleaner is a bagless vacuum that traps debris in a dust receptacle. The dust receptacle is removable to provide you with a convenient way to empty its contents. When the dust receptacle is too full, the vacuum may have difficulties vacuuming up debris. To ensure that you do not damage your WindStorm vacuum, empty the vacuum's dust receptacle after each use, as well as during use as needed.

Trash can
Paper towels or lint-free cloth

Instructions

- 1
  Ensure the power cable plug is not plugged into an electrical outlet.
- 2
  Locate the fixture hooks that hold the flexible hose in place.
- 3
  Press both of the fixture hooks in simultaneously and pull the flexible hose away from the vacuum to disconnect the hose.
- 4
  Locate the dust receptacle bin's release button on the top of the bin.
- 5
  Press the release button to release the bin while lifting it away from the vacuum.
- 6
  Hold the dust receptacle upright over a trash can.
- 7
  Turn the bottom of the dust receptacle clockwise to remove the cover. Allow the debris to empty into the trashcan.
- 8
  Wipe the inside of the dust receptacle out with a paper towel or lint-free cloth.
- 9
  Replace the cover over the bottom of the dust receptacle by turning it counter-clockwise.
- 10
  Reattach the dust receptacle to the vacuum by sliding it back into place until it clicks back in, and then reconnect the flexible hose.

How to Take Care of Calphalon Pots

How to Clean a BBQ Grill Grate

Cleaning Appliances