How to Attach a Swiffer Pad to a Roomba

Roombas, the automated and self-propelled robot vacuum cleaners manufactured by iRobot Corporation, have made the simple act of vacuuming even simpler. With the ability to sense stairs and other drops, turn around when running into a wall and get out of tight corners with ease, Roombas can be programmed to vacuum where and when you want. And while they work well on hard surfaces such as tile, wood and linoleum flooring, they lack the dusting power found in Procter & Gamble's Swiffer pads. Though dusting robots such as the Mint do exist, as do hard floor cleaning pads designed for Roombas, attaching a Swiffer pad to your Roomba is a simple and inexpensive task that will leave your floors cleaner.

Duct tape

Instructions

- 1
  Remove the Swiffer pad from its handle by pulling the two pieces in opposite directions.
- 2
  Flip the Roomba robot upside down and lay it on its top so that the wheels are exposed.
- 3
  Identify the dust receptacle on the underside of the Roomba. It is a clear plastic container located opposite the Roomba's third wheel.
- 4
  Cut two strips of duct tape approximately 2 inches in length and tape them to each end of the Swiffer pad.
- 5
  Lay the Swiffer pad on top of the Roomba's dust receptacle, tape-side down, and affix the tape to the body of the Roomba.
- 6
  Turn the Roomba back to its proper orientation with the wheels on the ground and set it in an area with hard floors. Press the button in the center of the Roomba to activate its cleaning function. Now the Roomba will continue to vacuum while the Swiffer pad will pick up the loose dust left behind.

A Comparison of the Hoover S3765-40 and the S3755

Carbon Odor Removal

Cleaning Appliances