How Do I Attach the Upholstery Attachment to My Hoover Steamvac?

The Hoover SteamVac is an alternative to renting a professional carpet cleaning machine from a retail store, and acts in much the same way, using warm water and cleaning solution to clean carpets and other surfaces. The SteamVac comes equipped with a set of tools for accessing hard-to-reach places and cleaning cars and upholstery. Attaching the upholstery tool to the SteamVac is fairly simple, and should only take a few minutes to complete.

Water
Cleaning solution

Instructions

- 1
  Turn off and unplug the Hoover SteamVac from the power source.
- 2
  Push down on the solution tank handle and pull it out. Set it aside.
- 3
  Take the hose out from the storage rack and step on the foot release pedal to lower down the SteamVac handle.
- 4
  Unlatch the back of the recovery tank lid and remove the lid. Slide the recovery tank front panel up and out.
- 5
  Slide the included converter panel down in place of the recovery tank front panel. It will slide down halfway before stopping.
- 6
  Pull the tan collar on the cleaner towards the tube so that the black tabs extend.
- 7
  Lift open the "Stair/Upholstery Cleaning Connection" port and connect the suction tube connector on to the nozzle inside the port. Push down firmly to ensure that the hose is completely connected.
- 8
  Hinge the back of the tank lid on the back of the tank and rotate it down until it's fully closed on all sides.
- 9
  Raise the SteamVac handle. Fill the water and solution tanks and restore power to the unit before using.

Advance Floor Cleaning Equipment

Computer Wet Wipes & Cleaning Fluid Hazards

Cleaning Appliances