How to Improve Suction on a Dirt Devil EnVision

As with any vacuum cleaner, as your Dirt Devil EnVision ages, the suction is reduced. This problem can be avoided if you clean your vacuum regularly, but can be fixed by replacing one important part to any vacuum. The filter is what removes any dirt from the air that that is being ejected by the vacuum. If the filter is clogged and dirty, less air flow occurs. This reduces suction drastically.

Dishwasher soap
Dirt Devil EnVision filter

Instructions

- 1
  Unplug the Dirt Devil vacuum power cord as a safety precaution.
- 2
  Press the release latch, located above the waste bin, and the bin loosens from the vacuum body.
- 3
  Pull the bin off of the vacuum. Pull the bin's lid off.
- 4
  Grab the filter and twist it to loosen it. Pull up on the filter to remove it.
- 5
  Fill the plastic bin with warm water and add 1 tsp. of dish-washing soap to the water. Use a scrub brush to clean the inside of the bin.
- 6
  Empty the bin out, rinse with warm water. Repeat until all of the soap has been removed. Place the new filter into the bin and twist to fasten it.
- 7
  Push the bin's lid back on top, and push the bin back into place.

How to Clean a Miele Washer With a Stainless Finish

Burning Smell From My Hoover Vacuum Cleaner

Cleaning Appliances