# How to Locate the Filter on a Dyson Vacuum Cleaner
Instructions
-
-
1
Press the bin assembly release to remove the dirt bin and cyclone housing.
-
2
Look for a latch on the side of the assembly. Some models, like the DC14, have a filter located here. If you see a latch, lift it to open the filter housing and remove the filter inside. Place the bin assembly aside for now.
-
3
Squat down and observe the base of the vacuum. Check for a latch on the top of the base. Models such as the DC17 have a filter located here. Lift the latch to expose the filter inside the housing.
-
4
Look for a pre-filter housing on the side of the base of the vacuum, like that found on the DC27. Press the release on the housing and detach the housing to expose the filter inside.
-
5
Press the foot pedal at the rear of the vacuum to expose the filter housing release on the front of the ball. Only some models of Dyson, such as the DC25, feature Ball technology. Press the housing release and raise the housing to reveal the filter.
-
1
- How to Replace the Filter Housing on a Frigidaire FRS26ZRF
- Can You Replace the Power Cord on a Dyson Vacuum Cleaner?
- How to Replace the HEPA Filter on a Dyson DC18 Slim
- How Does the Fan Cause the Vacuum Cleaner to Pick Up Dirt?
- How to Hook Up the Hose to a Dyson Vacuum
- How to Remove the Smell of a Burnt Rubber Belt in a Vacuum
- How to Change a Bissell Vacuum Cleaner Filter
- Why a Dyson Vacuum Cleaner Won't Work
- The Brush Won't Spin on My Dyson Vacuum Cleaner
- How to Replace the HEPA Filter on a Dyson DC14
- How to Change the Band on a Dyson Vacuum Cleaner
- The Features of a Dyson Ball Vacuum Cleaner
