# How to Remove a Hose on a Bissell ProHeat
The Bissell ProHeat is a carpet cleaner that comes in several models to address specific carpet cleaning needs. Each model has a hose attachment to clean areas such as upholstery, stairs and curtains. The hose is turned on by selecting “tools” on the dial located on the base of the machine. The hose can be removed for general maintenance or if it needs to be replaced.
Instructions
-
-
1
Turn off the machine and unplug it from the electrical outlet.
-
2
Unlatch the hose from the machine by turning the hose secure latch upward.
-
3
Unwrap the hose from the hose rack.
-
4
Grasp the hose at the base firmly and twist it back and forth while pulling it out of the unit. The hose is attached securely in the base of the unit to ensure proper suction. Removing it will require some effort. Twisting the hose while pulling it out will assist in making the removal easier.
-
1
Cleaning Appliances
- How to Remove a Roof Ventilation Turbine
- How Does the Tubing Go on a Bissell Powersteamer 1697-M?
- How to Remove the Brush Motor on a Bissell ProHeat
- How to Remove the Base of an Office Chair
- How to Remove an Under-Counter Dishwasher
- My Bosch Dishwasher Drain Hose Is Clogged: How to Remove It
- How to Remove Squeeze Clamps
- How to Activate the Hose on a Bissell Steam Cleaner
- How to Troubleshoot a Bissell ProHeat With Attachment Hose
- How to Troubleshoot a Bissell ProHeat Flow Indicator
- How to Take Apart a Bissell ProHeat 2X
- How to Replace the Brush for My Bissell Deep Cleaner
