Sentrysafe Manual Instructions

Open a Three Number Combination

• 1

  Ensure that the safe's handle is in the upward position.

• 2

  Insert the combination key and turn until the plunger pops out from the unit. Remove the key.

• 3

  Turn the dial to zero. Turn the dial to the left, passing zero at least three times for a three-number combination. Stop at the first number on the combination.

• 4

  Turn the dial to the right, stopping the second time you reach the second number of the combination.

• 5

  Turn the dial to the left, stoping the first time you reach the third number.

• 6

  Lock the safe by closing the door and pressing the key lock, and spin the combination a full turn.

Open a Four Number Combination

• 7

  Insert the key and turn it until the plunger pops out.

• 8

  Turn the dial to zero. Turn the dial to the left, ensuring that you pass zero at least four times. Stop at the first number of the combination

• 9

  Turn the dial to the right, stopping the third time you reach the combination's second number.

• 10

  Turn the dial to the left, stopping the second time you reach the third combination number.

• 11

  Turn the dial to the right, stopping the first time you reach the four the fourth combination number.

• 12

  Lock the safe by closing the door and pressing the key lock, and spin the combination a full turn.

Open the Safe with the Basic Electronic Lock

• 13

  Enter the factory-set five-digit code. This code is pre-programmed and cannot be changed. Access the code on the first page of your user manual.

• 14

  Wait for the LED lights to illuminate after you enter the code.

• 15

  Turn the handle and open the safe within four seconds after the LED light turns on. Lock the safe by closing the door and turning the handle to a horizontal position.

Program Your Own User Code and Temporary Pin

• 16

  Press "Prog" and enter the current, five-digit code.

• 17

  Enter the five-digit code of your choosing. The new code can be used to unlock the safe.

• 18

  Decide whether to create a PIN which gives someone else temporary access to the safe.

• 19

  Press "Prog" twice. Enter your current five-digit user code. Enter the chosen five digit user PIN.

• 20

  Disable the PIN by pressing "Prog" two times. Enter your five digit code and then enter "0000." The PIN will be deleted.