Disarm the system.
Enter the User Settings menu. Press "Next" twice until "User Settings" shows on the display. Press "Show/OK" and enter your master code. "Set Bypass" will appear on the display.
Press "Show/OK" and the number, state and name of the first zone will appear. The display will alternate. An example would be alternating between "Z01: OPEN" and "KITCHEN DOOR" You can tell from this message that the kitchen door in Zone 1 is open and not secured. Other messages are that the door is already bypassed or that the door is functional.
Press the "Show/OK" button and "<OK> TO BYPASS" appears, this is telling you to press "OK" to bypass.
Press "Show/OK" and "Z01: BYPASSED" appears on the display, alternating with the text "KITCHEN DOOR"
Press "Next" to check the state of the next zone. "Z02: FUNCTIONAL" alternates with "FRONT DOOR," for example, indicating the front door is functional and will be armed when you arm the system.
Quit programming by pressing "AWAY" and then click on "OK" when you see the message "<OK> TO EXIT."