Instructions for DSC Alarm Systems

Digital Security Controls (DSC) is an international electronic security company which manufactures a range of alarm and security systems. If such an intrusion happens, the alarm system loudly notifies you and law enforcement. With DSC, your premises are actually guarded by lines and perimeters of invisible and sensitive laser beams. When someone breaks through an opening, the alarm system sounds.

Instructions

- 1
  Hire a professional DSC installer. The DSC Power 832 alarm system comes with a control panel, keypads, sensors and detectors. Only the licensed DSC security professional is qualified to correctly install or repair the system.
- 2
  Know your access codes. The DSC alarm system has 37 codes comprising of a master code, 2 partition master codes, 2 duress codes and 32 regular access codes. According to the DSC installer, access codes can number either 4 or 6 digits. For incorrect codes, buzzers sound and you would have to re-enter access codes. When the correct code is inserted, the keypad alert will go off and the alarm's armed light will brighten.
- 3
  Familiarize yourself with the alarming modes. These are "Away" arming, "Audible exit fault", "Stay" arming, "Quick arm" and "Arming without entry delay". You can arm the system by using one of the LED or LCD keypads.
- 4
  Close in all windows and doors to arm the alarm system. If the ready light is switched on, it means that the windows and doors are closed and the alarm system is ready to be set. Punch in your access codes. If you have chosen, alarm systems with motion sensor zones, ensure that no movement occurs there.
- 5
  Disarm the system by entering the designated entrance and punching in your personalized access code.

How to Set Up an Alarm Monitoring Station

How to Use Resistors in Alarms

Home Alarm Systems