Video Door Phone Installation

Installing a home Video Door Phone helps protect the homeowner from answering the door for unknown visitors. By utilizing the video screen, the homeowner can see and speak to the person at the door without the need for opening the door. This security features help prevent home invasion robberies and allows the homeowner time to call for assistance from the police. Installation of the system is simple and takes less than 20 minutes of time.

Video cables
Video phone system
Power connector
Screwdriver

Instructions

- 1
  Open the video phone package and place the parts on the table. Locate the position on the wall where you want to attach the video monitor.
- 2
  Mount the video monitor to the wall using the screwdriver. Attach the corners of the monitor with the screws and secure tightly. Attach the monitor conductors to the end of the monitor.
- 3
  Run the wires that will connect the main terminal of the system over to the magnetic strip that fits into the doorway or window sill.
- 4
  Take the wires and connect them into the locking mechanism that is located on the end of the magnetic strip.
- 5
  Install the video camera where you have easy access to it. Plug the camera into the video monitor you installed on the wall and power up the system.
- 6
  Ask a friend to step outside to test the system and make sure that it is working properly.

How to Troubleshoot Phone Entry Systems

How to Install an Aurora Motion Detector

Home Alarm Systems