How do I Install a Kissimmee Security System?

Install the security system's main control board. This board can go anywhere as long as it can reach a telephone or cable wire. Connect the main control board to the wire by inserting the jack of the telephone or cable line into the corresponding port of the control board. This process requires a cable or phone service. Cable companies available in Kissimmee include Comcast, Century Link and Brighthouse.

Install door sensors on entry doors. Drill a hole into the door's frame and push the transmitter of the sensor into the door. Secure the sensor using glue. Turn the handle to open the door and drill a small hole in the surface of the door. Insert the magnet into the door and secure it with glue. Run the signal cable of the transmitter to the main board.

Install window sensors. Glue the transmitter to the window frame. Open the window and glue the sensor to the window's surface. Run the signal cable of the transmitter to the main board. Check the window to ensure that it is not glued shut. Since Kissimmee temperatures reach 90 degrees in the summer, you want adequate ventilation.

Attach the remote control panel to the wall next to the home's main door. Run the signal cable of the main board to the remote control panel.

Turn the system on by pressing the power button. Test the system by opening doors and windows. If you notice a problem, contact the security company immediately. Since the Kissimmee violent crime rate is slightly higher than the rate in the rest of Florida, you want a security system that functions perfectly.