Arm the alarm by pressing the "Away" key for two seconds. Enter your access code and press the asterisk button. The armed and ready indicators will illuminate. The armed indicator looks like a small lock and the ready indicator is a check mark.
Disarm the system when you enter the premises. Enter your sequence code; the illuminated armed light will now go off showing the system is disarmed.
Change the alarm to the partially armed setting. This setting will disarm the motion sensors but keep the doors and windows armed. Press and hold the "Stay" key for two seconds and then enter your access code. The system will beep to signal the code was accepted. The "Armed" and "Bypass" indicators will be illuminated on the keypad screen. This shows that the system is armed however certain aspects are bypassed.
Change from the "Stay" partially armed mode to the "Night" mode by pressing asterisk and then the number one. This will automatically fully arm the system. Disarm the system at anytime from any installed keypad by entering your private sequence code.