Rokonet Orbit-6 Motion Detector Installation

The Rokonet Orbit-6 is a home alarm system that monitors windows, doors and even whole areas of your home. It is all controlled via a master keypad on a wall-mounted plate. On top of its many features, you can also install motion detectors in your home. Rokonet manufactures these infrared sensors as well and they can be set up in a matter of minutes.

Power drill

Instructions

- 1
  Place the sensor in the area of the home where you would like to install it. If you have a ceiling sensor, use your power drill to drill in the screws on the included mount on the ceiling, then slide the sensor into the mount.
- 2
  Position the sensor so the eye of the sensor has a clear field of view to the area you would like to monitor.
- 3
  Plug the power cable running from the sensor into an available wall outlet.
- 4
  Power on your central keypad and enter the sync code found in the user manual for the particular model sensor that you have just set up.
- 5
  Set the alarm the same way you would normally do it and the sensor will now be included in the system. You can also manually turn the sensor on and off via the "Power" button on the front of the sensor.

Problems With ADT Security Systems

The Best Alarm Systems With ADT Home Security

Home Alarm Systems