# How to Program a ZOpid 2-in-1 Motion Detector
The ZOpid 2-in-1 is an alarm system that can be set as a sensor for doors or windows or can be set as a motion sensor. The unit is portable, so you can set it up anywhere in your home you feel it is needed. The unit requires a four-digit code to function. It's up to the user to set this code. Once it is set, the unit is ready to go.
Instructions
-
-
1
Place the ZOpid unit in the room or area where you would like to detect motion.
-
2
Use the included tape to tape the back of the ZOpid to a wall.
-
3
Press the "Power" button on the unit to turn it on.
-
4
Set the dial on the front of the unit to "Motion."
-
5
Enter a four-digit security code when prompted. The unit is now programmed. You will have 30 seconds to enter the security code into the unit, to silence the alarm, if you happen to trip the motion sensor.
-
1
Home Alarm Systems
- How to Install a Motion Detector Home Alarm System
- How to Replace a Home Alarm Motion Detector
- How to Test a Motion Detector
- How to Beat a Motion Detector
- How to Remove an Interior Alarm Motion Detector
- How to Reinstall a Motion Detector Light
- How to Wire a Buzzer to a Motion Detector
- How to Adjust a Motion Detector Light
- How to Install an Aurora Motion Detector
- How to Wire a DSC Motion Detector
- How to Remove a Alarm Motion Detector
- How to Avoid Motion Detectors
