How to Change the Code on Schlage Keyless Door Locks

Change the Personal Code

• 1

  Locate your personal code for your Schlage keyless entry system if this is the first time you are changing the code. This is the six-digit number printed on the back of your lock on a yellow sticker or on the instructions that came with your system.

• 2

  Enter your six-digit personal code into the keypad. Once you enter this number, press the Schlage button above the keypad and then press the number 3 on the keypad.

• 3

  Enter a new six-digit personal number. Pause for a second after entering the number and then re-enter the new number. If the light flashes green, the new code has been accepted. If the system light flashes red, you have entered a wrong number and must start over.

Changing User Codes

• 4

  Locate your personal number and the user code if you wish to delete a user code from the keyless lock. Look for the personal number and user code on the back of the lock on a yellow sticker or with the instructions that came with your keyless system.

• 5

  Enter your six-digit personal number into the keypad and then press the Schlage button above the keypad. If you are deleting an old user code, press the number 2 after you press the Schlage button. If you are adding a new user code, press the number 1 after you press the Schlage button.

• 6

  Enter the four-digit user code you wish to add or delete into the keypad. Pause for a second, and then enter the four-digit number again. If the system light flashes green, you have successfully added or deleted a user code. If the light flashes red, you have entered a wrong number and must start over.