How to Make Slippery Tiles Rough

When moisture collects onto a smooth surface, like tiles, it can become very slippery. Bathroom and kitchen floors are often tiled and can become hazardous without some kind of nonslip coating. An epoxy nonslip sealant makes slippery tiles rougher, giving feet something to grip when the smooth surface becomes wet or oily. You can apply nonslip sealer yourself to just about any ceramic finish tile. If tiles and grout have been previously sealed, you'll need to strip them first so the new nonslip water-based sealer can bond properly.

Detergent
Cloths
High-quality sponge mop
Epoxy sealant
Bucket

Instructions

- 1
  Clean the tiles well using hot water and detergent. Ensure all dirt and oil are removed from the tiles as well as the grout. Let the tiles dry completely.
- 2
  Pour the sealer into a bucket and dip the mop in. Apply the sealer to the tile floor in short and even strokes. Start in the corner of the tile area, and when it is time to re-wet the mop, pick up where you left off.
- 3
  Work on the farthest point on the tile and move toward the area closest to the door. Avoid boxing yourself into a corner and having to step on the sealant to get out.
- 4
  Allow the first coat of sealer to dry completely, according to the directions on the package. Place fans nearby to speed up the drying process if desired. Open windows throughout the house to increase circulation.
- 5
  Apply another coat of sealant after the first one dries, if the manufacturer's instructions say so. Allow a second coat to dry completely, anywhere from 24 to 48 hours, depending on the manufacturer's instructions.

Can You Use an Extension Cord With a Surge Suppressor?

Two-Prong Versus Three-Prong Dryer Adapters

General Home Safety