How to Sharpen a Bow Saw Blade

Over time as it is used, a bow saw will lose its shape and sharpness. Regular sharpening must be done in order to keep your blade in optimal condition. There are a number of specialty tools required to keep your saw blade sharp. Most modern saws have hardened teeth, which makes them impossible to sharpen without a diamond file. Older blades are made of softer metals and can be sharpened by more affordable saw files and saw sets.

Flat vile
Saw vise
Saw file
Saw set

Instructions

- 1
  Fix the saw in the saw vise.
- 2
  With the flat file, file back and forth over the row of teeth until a blunt surface has been made on the point of every tooth.
- 3
  Reshape the saw blade teeth with a three-sided file. Each tooth should receive three to four strokes from the file overall. Repeat this process until all the teeth are the same shape, and the base of the teeth is in a neat line.
- 4
  Bend the teeth of the saw outwards to either side in an alternate fashion. This makes the cut of the saw wider than the blade, so the blade will never catch while sawing.
- 5
  Guide a three-square saw file horizontally through the gap between the teeth. The file should just just clear the jaws of the blade. Sharpen at right angles to the blade if you are working on a rip-cut saw, and at a 60-degree angle if any other type. The back and front of two teeth should be filed together, lifting the file slightly as it returns.

How to Use Wooden Bench Dogs

How to Screw & Plug Joint Wood

Woodworking