How to Treat Untreated Wood

Untreated wood is vulnerable to moisture as well as insect pests, such as termites. Wooden steps and patios located outdoors can quickly absorb rainwater and snow, causing the wood to warp, erode and eventually rot. Treating wood with a water seal helps it repel moisture, blocks harmful insects and keeps the wood looking its best.

Sander and 250 grit sandpaper
Vacuum cleaner
Paintbrush, roller or sprayer
Water seal
Wood stain

Instructions

- 1
  Wash the wood with soap and water and allow it to dry completely.
- 2
  Sand the entire surface of the wood along the grain with a sander and 250-grit sandpaper to make it smooth. Hand-sand corners, edges and other areas difficult to reach with the sander.
- 3
  Vacuum the wood to eliminate the dust and debris from sanding.
- 4
  Apply water seal evenly over the entire surface of the wood using a paintbrush, roller or sprayer. Allow the seal to dry thoroughly.
- 5
  Apply wood stain to the wood with a paint brush, if desired.
- 6
  Wait two days before walking, sitting on or otherwise using the wood.

The Best Types of Stain for Quarter-Sawn Oak

How to Connect a Mitered Joint

Woodworking