Unscrew the screws in the cabinet door hinges on the cabinet door that you wish to disassemble using a screwdriver. Lift the door from the cabinet opening and place it flat on a work surface.
Remove the cabinet knob by unscrewing the knob screw or screws with a screwdriver. Set the knob hardware aside.
Heat up the wood finish at each of the miter joints by moving a heat gun in a steady motion across each joint. Scrape the finish off from the joints using the scraper tool. Scrape in the same direction as the wood grain. Do this procedure on both sides of the cabinet door.
Score the miter joints carefully with an utility knife on both sides of the cabinet door. Heat the seams of the joints with the heat gun and continue to score the joints with the utility knife until they are completely loose.
Reverse the squeeze clamp so it squeezes in an outward direction instead of inwards like a standard clamp. Position the squeeze clamp on the inside edges of the miter joint frame at each end of the door. Slowly and carefully squeeze the clamp until the joints pop apart.
Set the squeeze clamp aside. Pull the miter joint frame apart the rest of the way with your hands. Lay all of the cabinet door parts out on a work surface. Sand the ends of the parts where they join together lightly with a fine-grit sanding pad to remove any glue residue.