Turn on the Champion water system tank until the tank pump automatically shuts off.
Open one of the drain fixtures to empty the well tank.
Turn the pump cut-in setting clockwise slightly if there is a pause between the moment the tank is empty and the moment the pump starts to operate.
Close the drain fixture and allow the tank to fill until the pump automatically shuts off, monitoring the time the tank takes to fill.
Open the drain fixture again and wait to see if there is a pause between the moment when the tank is empty and the moment when the pump starts back up. Adjust the pressure switch clockwise slightly again if there is a pause. Repeat until there is no pause between the time when the tank empties and when the pump turns on.