How to install a utility sink

In this article it is asumed that there is a sink already in place you are either upgrading or replacing.If not there will be another article to explane how to install a new one. Okay lets get started

Remove the old sink. measure or place the sink against the wall so you have a refernce point for the drain and the braket that will be mounted on the wall.

After locating where the braket goes, Mount it to the wall.

Install the faucet on the sink, Also install the supply lines this will make it easier so you wont have to lay under the sink later. Also install the strainer.Install the provided legs. Now you are ready to hang it on the wall

Once the sink is in place hook the drain and the water lines to the valves and test for leaks