How to Paint Steel Beams

If you have steel beams that appear out of place from their finished surroundings, you can help them blend in better by applying the correct type of paint. Because steel beams are nonporous, they are ill-suited for adhesion and require abrasion prior to application. Unfortunately, because steel is so durable, it is resistant to friction-based abrasion techniques. You must apply a special type of base coat, capable of etching the metallic surface. This will provide a tooth for the paint to adhere to and will prevent the steel from eventually shedding its new finish.

Water-based degreaser
Coarse plastic brush
Water hose
Wet rags
Heavy-duty fabric drop cloths
Galvanized metal etching primer
3- to 4-inch latex paintbrush
Acrylic latex paint
Red oxide primer
Oil-based enamel

Instructions

- 1
  Clean the steel beam with a water-based degreaser, using a coarse brush. Rinse the beams with a water hose if they are located outdoors. Use wet rags if the beams are in the interior of the home. Wait 1 to 3 hours for the beams to dry.
- 2
  Protect surfaces beneath the steel beam with fabric drop cloths.
- 3
  Coat the clean steel beam with a galvanized metal etching primer, using a paintbrush manufactured for use with latex paints. Wait four hours for the primed steel beam to dry.
- 4
  Clean the brush with water.
- 5
  Coat the primed steel beam with an acrylic latex paint. Apply paint to the beam just as you did the primer. Wait two hours for the painted steel beam to dry. Add another coat if the etching primer shows through.

How to Paint Vinyl-Coated Furniture

How to Finish Drywall Around Garage Doors

Painting