How to Make Your Own Concrete Dye With Acetone

Select the color you wish to dye your floor or concrete surface. Concrete dye can be found in a wide array of colors. If the color you want is not available, you can mix existing colors to produce your desired color.

Purchase the amount of powder dye you will need. Check the coverage area indicated on the dye to determine how much you will need to complete your job. Coverage rates will vary by manufacturer. Be sure to factor in how intense you wish the color to be. Dying generally requires two applications but for a more intense color change you may need additional applications. Concrete dye may be available at a local hardware store; however, a wider variety of color choices may be available though an online manufacturer.

Purchase an equal amount of acetone. For example, if you purchase one gallon of dye then you will need one gallon of acetone as well. Acetone is generally available from a local hardware store.

Pour the dye directly into the acetone container. Shake the container for 30 seconds to mix the dye with the acetone. Repeat the process if additional dye is needed.

Set the container aside for approximately 30 minutes to allow it to settle before use. Shake, or re-mix, the mixture often while applying the dye to keep the dye well mixed.