# How to Get a Water Bubble Out of a Countertop
Things You'll Need
- Contact cement solvent
- Craft paintbrush
- Flexible putty knife
- Contact cement
- Small wood block or other object
- Rolling pin
Instructions
-
-
1
Apply the contact cement solvent on the edge of the countertop nearest the bubble. Use a craft paintbrush to apply the solvent. Allow it to dissolve the contact cement according to the directions on the label.
-
2
Lift the edge of the laminate with a flexible putty knife once the solvent starts to work.
-
3
Apply more of the solvent underneath the laminate until you can lift up the laminate over the bubble area.
-
4
Allow the solvent to dry completely.
-
5
Use the brush that comes with the contact cement to apply it to the substrate underneath the laminate.
-
6
Place a small piece of wood or another object between the laminate and substrate to allow the contact cement to become tacky.
-
7
Wait until you can press a finger to the contact cement and can bring it away without any residue sticking to your finger.
-
8
Press the laminate down smoothly with your fingers to allow the contact cement to form a bond.
-
9
Use a rolling pin over the laminate to ensure the bond secures to the substrate.
-
1
- How to Get Water Out of a Toilet Before Demo
- How to Get Iron Out of Sprinklers
- How to Safely Get Water out of a Basement
- How to Get Mold Out of Your Iron
- How to Get Water Stains Out of Baseboards
- How to Get Dirt Out of Sprinkler Lines
- How to Get Mildew Out of an Outdoor Water Fountain
- How Do I Get a Bubble Out of Flooring?
- How to Get a Bubble Out of Sheetrock
- How to Get Odor Out of a Countertop Ice Maker
- How to Get Cigarette Smoke Out of Leather
- How to Get a Tabasco Stain Out
