How to Cover Up Mildew on Studs With KILZ

Covering up mildew stains restores the aesthetics of your outdoor or indoor studs. Mildew is not only unsightly, but also poses serious health concerns. KILZ is a popular all-purpose primer for getting rid of stains before applying a paint. It's best to use a primer under paint, at it allows the finish coat to better adhere to the surface of the studs. Because there are many different types of KILZ primers, use the primer specifically formulated to cover mildew stains.

Bleach
Water
Spray bottle
Sponge
Mask
Gloves
Soap scum remover
Fan
Drop cloth
KILZ 2 latex primer
Paint tray
Paint brush
Sandpaper
Paint

Instructions

- 1
  Remove all plants and vegetation from the area. Make sure any nearby windows are closed.
- 2
  Mix up 50 percent water and 50 percent bleach. Pour mixture in a spray bottle. Spray wooden studs and scrub with a sponge.
- 3
  Rinse the area with water. Remove any left over soap scum with a soap scum remover like Clorox Tilex or Scrubbing Bubbles Soap Scum Remover.
- 4
  Place a fan in front of the wet studs or allow the wood to dry naturally. If you are cleaning in the winter, it is best to begin the project in the morning to give your studs time to dry. Make sure the area is completely dry before priming with KILZ.
- 5
  Lay drop clothes on the floor under the studs. Pour a fourth of your KILZ 2 Latex primer into a paint tray. Dip paint brush and paint in smooth even strokes. Allow for the paint to dry for at least one hour before repainting the entire surface again.
- 6
  Smooth any rough dried paint with sand paper. Apply a paint that has been treated with a mildew-cide from your local hardware supply store.

How to Paint Concrete in Basements for a Moisture Barrier

How to Pick Paint to Match Laminate Flooring

Indoor House Painting