How to Remove Sanded Caulk From Granite

Keep a clean, damp cloth nearby as you apply the caulk. After each application, wipe the excess caulk off the granite immediately before it has a chance to dry.

Turn the rag or use another clean rag to wipe off any residue that may be left, so that the granite is thoroughly cleaned before you continue caulking. Change the rinse water often to avoid spreading caulk over clean areas.

Dust the granite once the caulk dries if you missed spots during the application, or run a small hand-held vacuum over the dried caulk. Repeat until all the caulk dust is gone.

Wash the area where the sanded caulk penetrated the granite. Use a mild detergent or soap stone and a clean rag. Wipe the granite dry after washing.

Make a poultice if the caulk has set deep into the granite, leaving an obvious stain after you’ve dusted all the excess off the granite and washed it with soap. Mix a liquid cleaner with white paper towels or cotton pads until you have a pasty mixture.

Moisten the stain with distilled water and set the pasty paper towel over the spot. Cover it with plastic and tape down the edges. Leave the poultice in place for 24 to 48 hours and then remove. The poultice draws the caulk to the surface where you can rinse it away with distilled water. Repeat up to five times to thoroughly remove deep stains caused by sanded caulk left on the granite for too long.