# How Can I Make the Furnace Work if the Thermostat Is Broken?
If your furnace won't come on even though the house is cold, the problem could be a faulty thermostat. The thermostat measures the temperature in your home and directs your furnace to come on when the temperature falls to the level you've set. If your thermostat is broken, you don't have to shiver until the repairman can come or until you can get to the store to buy a new thermostat. You can temporarily bypass the thermostat and your house will be warm in no time.
Things You'll Need
- Screwdriver
- Pencil
Instructions
-
-
1
Turn off the breaker to the furnace. Locate the breaker and flip it to the "Off" position.
-
2
Remove the thermostat cover. On some models, you can pop off the plastic cover, while with others you'll need to unfasten a couple of screws. Set the cover aside.
-
3
Locate the red and white wires attached to two screws on the thermostat. Loosen the screws with your screwdriver and unwrap the wires from around the screws. Hold onto the wires and don't let them slip back behind the wall.
-
4
Wrap the exposed ends of the two wires together. Slip a pencil behind them to prevent them from falling behind the wall.
-
5
Return the furnace breaker into the "On" position. Your furnace should light and begin to heat.
-
1
Heating & Cooling Repair
- How to Access the Main Blower in a Furnace
- How to Know if the Sequencer Is Broken on My Electric Furnace
- How to Short-jump a Furnace
- How to Disconnect the Coupling for a Furnace Thermostat
- How to Make the Coils Hotter in an Electric Furnace
- How Can I Make a Floating Wall Desk?
- How to Make Desk Nooks in the Kitchen
- How to Increase the Temperature Differential of a Thermostat
- How to Change the Ignitor on a Luxaire Furnace
- How to Change the Motor Speed on a Tappan Furnace
- How Can I Test a Furnace Draft Inducer?
- How to Make Furnace Filters More Effective
