# How to Change the Chime on a GE Wireless Door Chime
The GE wireless doorbell has several different chimes available other than the standard “ding-dong.” Changing the chime on a GE wireless door chime generally is the same on all of the company's wireless doorbells. There is a line of terminal switches in the push button known as a channel. The channel uses a small black jumper to complete a circuit. Changing the door chime requires removal of the push button to access the jumpers.
Things You'll Need
- Flat-head screwdriver
Instructions
-
-
1
Push the tab on the bottom of the GE push button inward with a small flat-head screwdriver. Pull the bottom half of the push button away from the mounting plate while holding the tab with the screwdriver. Pull the push button completely away from the mounting plate.
-
2
Pull the battery out of the back of the push button. Locate the jumper that is on either the seven, eight or nine channel on the row of channels below the battery holder.
-
3
Grab the jumper with your fingers and pull it out. Place the jumper in one of the other channels to change the door chime. Push the push button back over the mounting plate until it snaps into the locked position.
-
1
General Home Repair
- How to Change the Water Line in a Freezer Door
- How to Change the Mesh on a Retractable Screen Door
- How to Change the Combination for a Supra Push Button Combination Lockbox
- How to Change the Kitchenaid Dishwasher Door Color
- How to Change the Latch on a GE Microwave Door
- How to Wire a Push Button Door Bell
- How to Change the Door Bell Button
- How to Add or Remove Jumpers on a GE Wireless Door Chime
- How to Change Garage Door Wheels to the Nylon Rollers
- How to Change the Security Code on a Craftsman Wireless Door Opener
- How Do I Change the Code on My Wireless Garage Door Keypad?
- How to Install a Push Button Door Knob
