Find the breaker that the submersible well pump is connected to and turn it off.
Remove the pump from the well following the manufacturer's recommended removal instructions as stated in the owner’s manual for your specific make and model of submersible well pump.
Examine the intake of the submersible pump for surface debris such as vegetation. Use your hand to remove the debris from the intake.
Scrub mud off the pump screen gently with a soft-bristle scrub brush. Wipe mud off the pressure control switch with a cloth.
Locate the tubing running from the well to the pump. Remove the tubing by gently pulling it off the well and the pump. Clear the tube by running water or blowing canned air through it. Alternatively, replace the tubing.
Hook the tubing on the well and the pump. Switch the breaker back on.