How to Install a Thermostatic Mixing Valve

Installing a Thermostatic Mixing Valve

• 1

  Check local building codes to ensure all laws are followed with regard to what qualifications are required by code when installing the mixing valve.

• 2

  Turn off the main water supply and open all faucets to allow water in the lines to drain. Be patient as this may take some time.

• 3

  Select a location that will be accessible for cleaning, adjustment and servicing. Also note that dishwashers may benefit from hotter water. Run a separate line directly from the water heater to the dishwasher or to other appliances that might require higher temperature water to avoid using the mixing valve in these cases.

• 4

  Solder the connections to the thermostatic valve before attaching it to prevent damaging the gaskets. Ensure that the solder is safe for potable water to prevent harmful elements from having contact with water used for drinking.

• 5

  Tighten the connections to the valve using a wrench.

• 6

  Turn the water on and check the temperature of the water from a faucet using a thermometer. Allow some time for the hot water to reach the faucet before recording the temperature.

• 7

  Turn the hand wheel to adjust the dial to the desired temperature. The instructions that come with the thermostatic valve should indicate what the current assumed water temperature is without the mixing valve attached and what difference a one-degree turn will equal in percent.