How to Remove Excess Glue From New Novalis Flooring Tile

Novalis International specializes in “peel and stick” floor tile. These tiles are easy to install, since no additional adhesives are needed – simple peel the sticker-like backing off the tile and press it onto its proper location on the floor. Sometimes mistakes happen, however, and the back of one tile may stick to the front of another, leaving adhesive residue on the visible side of the tile. This residue is easier to remove before it has a chance to set, but it also is not difficult to remove if you cannot get to it in time.

Things You'll Need

• Rag
• Mineral spirits
• Razor blade
• Oil-based remover
• Soapy water
• Towel

Show More

Instructions

1. • 1

     Open the cap and pour a quarter-size amount of mineral spirits onto a rag. Rub the rag over the still-wet adhesive until it dissolves.

   • 2

     Hold the razor blade so its sharp edge is at a 45-degree angle to the dried adhesive. Gently scrape up as much of the excess adhesive as possible. Be careful not to scratch the tile.

   • 3

     Pour a dime-sized amount of oil-based remover onto a rag. Rub the rag over the remnants of the tile adhesive until it loosens and vanishes.

   • 4

     Wash the tile with soapy water to remove any residue from the remover and the adhesive. Wipe dry with a soft towel.