How to Convert a Wand Sprayer to a Boom Sprayer

Cleaning a gutter is expedited by spraying water under pressure through the channel. To remove contaminants that have become firmly stuck in the gutter, convert the wand sprayer to the higher pressure boom sprayer. The procedure is done through the use of an accessory that changes the pressure of the water coming through the sprayer. You do not need any tools to convert the wand sprayer to the more powerful boom sprayer.

Spray management valve
Boom sprayer accessory

Instructions

- 1
  Rotate the water valve that the sprayer's hose is connected to counterclockwise. Continue to rotate the valve until resistance is felt.
- 2
  Point the wand at the end of the sprayer tube towards the ground to empty it of water.
- 3
  Grip the end of the sprayer tube with one hand. Grip the wand at the end of the tube with the other hand. Unscrew the wand from the tube. Pull the wand off the tube with a twisting motion. Place the wand on the ground horizontally.
- 4
  Screw the spray management valve onto the end of the tube. Hold the boom accessory in your left hand with the nozzle facing to the left. Grip the end of the tube in your right hand.
- 5
  Screw the boom accessory's end, opposite the nozzle, on the end of the tube. Turn the water valve three or four turns clockwise.

How to Remove Pebble Dashing

How to Paint Concrete Walkways With Non-Slip Coatings

Exterior Home Repair